Morso 3142 - Convection Wood Stove

MSRP: $2,699.00
Was: $2,699.00
Now: $2,294.15
(You save $404.85 )

Morsø 3142 Convection Wood Stove



The Morso 3142 wood stove is equipped with a riddling grate and ashpan, making it easy to remove ash and clean the stove.
It is manufactured using the latest combustion principles with tertiary air supply and meets the most stringent environmental requirements.

It can be fired with wood, briquettes or approved smokeless fuel and is suitable for heating an area of up to 75 cubic metres.

Technical data

Technical data

  • Convection Fan
  • Pre-heated combution air
  • Pre-heated secondary air supply
  • Ash Can
  • Airwash system
  • Tertiary Air
  • Riddling grate system


  • Wood


  • DIN+
  • EN/N
  • EPA

Technical data

  • 10 year limited warranty
  • Gasketed seams for tight seals
  • Chromium treated internal casting for durab
  • Reversible flue collar
  • Non catalytic burn technology
  • Clean-burning air wash system
  • Secondary air supply
  • Riddling grate system/shaker grate


Technical data

Maximum Heat 30,000
Log size 12"
Max. Area Heated 1000 ft2
Firebox Dimensions 13 1/4 W x 12 1/2 D
Firebox volume/capacity 0.9 ft3
Outside air supply Available
Gross Weight 272 lbs
Rated Output (kw) 5,3
Operating Output (kw) 3-6
Heats (m2) 45 - 90
Height (mm) 739
Width (mm) 514
Dept (mm) 450
Flue outlet top Ø 125
Flue outlet rear Ø 125
Weight (kg) 113
Chamber Width (cm) 30

Clearance to combustibles

Rear (mm) 200
Sides (mm) 600
Basic Clearance using single wall pipe top vent
Stove to side wall 16"
Stove to rear wall 9"
Stove to corner 13"
Basic Clearance using double wall pipe top vent
Stove to side wall 16"
Stove to rear wall 7"
Stove to corner 11"


Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.

We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.